Hello,
Do you know if there is an extension for acquiring data from MS dynamics cubes? Or should I first have them in Excel and then open the Excel in Lumira?
Thanks!
Elena
↧
SAP Lumira with Microsoft Dynamics
↧
Re: how to give authorization to restrict users in badi (workorder_goodsmvt ) of co11n
BUT IN BADI WORKORDER_GOODSMVT WHERE THIS CODE IS MENTIONED OR WRITE.
↧
↧
Stuck formula
Please help to get formula i am stuck..Please get me formula for Local% and Expact..
Regards,
↧
Re: QM Order
Hi,
Please take clues form the below threads:
https://scn.sap.com/thread/3858741 ==> Check the condition suggested for A.a) in this thread.
http://scn.sap.com/thread/3733478 ==> Go through Keerthi's response.
https://scn.sap.com/thread/3861474
https://scn.sap.com/thread/3842109
Thanks,
Arijit
↧
Re: ECC system not able to connect with HANA database
Dear Srini,
Please find the logs files below;
startsap check
Checking db Database
Database is not available via R3trans
-------------------------------------------
Checking SAP <SID> Instance ASCS01
-------------------------------------------
Instance ASCS01 is not running
Checking SAP <SID> Instance DVEBMGS00
-------------------------------------------
Instance DVEBMGS00 is not running
R3trans -x output
R3trans -x
This is R3trans version 6.25 (release 742 - 07.10.15 - 17:42:42).
unicode enabled version
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
R3trans finished (0012).
trans log
4 ETW000 R3trans version 6.25 (release 742 - 07.10.15 - 17:42:42).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 29.04.2016 - 16:22:10
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000 [ dev trc,00000] Fri Apr 29 16:22:10 2016
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/BPD/SYS/exe/run/dbhdbslib.so' ...
4 ETW000 [ dev trc,00000] Library '/usr/sap/BPD/SYS/exe/run/dbhdbslib.so' loaded
4 ETW000 [ dev trc,00000] Version of '/usr/sap/BPD/SYS/exe/run/dbhdbslib.so' is "742.06", patchlevel (0.300)
4 ETW000 [ dev trc,00000] DBHDBSLIB : version 742.06, patch 0.300 (Make PL 0.300)
4 ETW000 [ dev trc,00000] HDB shared library (dbhdbslib) patchlevels (last 10)
4 ETW000 [ dev trc,00000] (0.300) SAP Support Package Stack Kernel 7.42 Patch Level 300 (note 2237353)
4 ETW000 [ dev trc,00000] (0.222) Describe on a decimal datatype with a large scale value (note 2220646)
4 ETW000 [ dev trc,00000] (0.217) Use connection variables instead of table M_CONNECTIONS (note 2207349)
4 ETW000 [ dev trc,00000] (0.211) Check session information before each SQL call (note 2191987)
4 ETW000 [ dev trc,00000] (0.210) Cancel FDA SQL statement (note 2177669)
4 ETW000 [ dev trc,00000] (0.114) Netweaver for HANA on linuxppc64 (note 2150817)
4 ETW000 [ dev trc,00000] (0.114) SSFS connect with shadow user (note 2154936)
4 ETW000 [ dev trc,00000] (0.111) R3szchk uses LAST_ESTIMATED_MEMORY_SIZE with HANA rev. 91 (note 1952609)
4 ETW000 [ dev trc,00000] (0.111) R3load with deferred lob writing (note 2147622)
4 ETW000 [ dev trc,00000] (0.110) FDA in a non unicode system disabled (note 2130541)
4 ETW000 [ dev trc,00000]
4 ETW000 [ dev trc,00000] Loading SQLDBC client runtime ...
4 ETW000 [ dev trc,00000] SQLDBC Module : /usr/sap/BPD/hdbclient/libSQLDBCHDB.so
4 ETW000 [ dev trc,00000] SQLDBC Runtime : libSQLDBCHDB 1.00.102.02 Build 1446663129-1530
4 ETW000 [ dev trc,00000] SQLDBC client runtime is 1.00.102.02.1446663129
4 ETW000 [ dev trc,00000] Try to connect via secure store (DEFAULT) on connection 0 ...
4 ETW000 [dbhdbsql.cpp,00000] *** ERROR => Connect to database failed, rc=1, rcSQL=10
4 ETW000 [ dev trc,00000] SQLCODE : 10
4 ETW000 [ dev trc,00000] SQLERRTEXT : authentication failed
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 10 performing CON
4 ETW000 [ dblink ,00000] ***LOG BY0=>authentication failed
2EETW169 no connect possible: "DBMS = HDB --- SERVER = '' PORT = ''"
~
Thanking you in advance.
-regards,
Yonten
↧
↧
Re: Withholding Tax
That's right madhu, I agree for doing cross company codes postings with CWT and EWT it should be active in both company codes then only its possible right,
But Once I activated I can able to do cross-company postings in both (CWT & EWT) so my question is once I activated I can able to do cross company postings for CWT company codes in this case all my vendor invoices, cleared items, parked documents, master data etc., can I able see all this? If not its mandatory to run WTMG.
Anil
↧
Re: Map an undefined node
Hello Sap,
Then try creating DAta type with optional.
Check the below link
↧
Re: EPM disabled but not possible to enable
We have tried to uninstall and install again but that didn't work for us. But we haven't tried it in combination with a newer EPM patch. Will test it.
↧
Re: Is it not possible to use GroupBy or Having clause in sap BO Webi variables
Did you followed the steps that I suggested ?
1. Bring JobName and Status in the Report.
2. Create a Measure [CountRunID]=Count([RunID]) In ([JobName];[Status]) and pull that as well in the report along with above two.
3. Create a Block Level Filter where [CountRunID]>1 and [Status]="Failure"
One more thing that I noticed that If you want to see only jobs of Status failure then is there a need to display that in the result set as its going to be same across the block.
Regards
Niraj
↧
↧
Re: Word Wrap problem in RTE Control
Are there any events/functions that could be called based on data from the DB that would result in a change to the order of events?
Just for jollies? Try adding code after the load of your document to refresh the word wrap?
this.WordWrap = FALSE
this.WordWrap = TRUE
↧
Groupware Integration into CRM
Dear All,
We are planning MS Exchange 2016 groupware integration into CRM 7.
SAP groupware connector 7 is the latest version i could find but unfortunately it looks like this is only working with MS Exchange up to 2013.
Is there anybody who can tell me whether:
- any later SAP connector version is around that supports MS Exchange 2016 or
- any update when Exchange 2016 support will be available?
Or can we just go for SAP Groupware Connector 7 and MS Exchange 2016 integration (as same technologies used)?
Thanks in advance for any feedback and useful links
Michael
↧
Re: Transfer license problem
↧
Re: EPM disabled but not possible to enable
Hi Ashish,
We have tried this but it didn't work.
Regards
Johanna
↧
↧
Re: One Input Tax Code and mutliple Statewise GL Accounts
Can you post the error message number?
↧
Re: Issue in calculation of Bonds accrued interest - Unit Quoted Bonds - 04K
Hi Friends,
The issue of calculation is solved. I changed the product type to 04I i.e. fixed interest bonds.
So closing this thread.
Regards,
Rohan
↧
PI sheet - Activity End Date coming by default
Dear Experts,
We are trying to enter activity end date in PI sheet but these all are coming by default in the few orders. Only those orders are getting this error which where uploaded during upgrade cut-over upload.
Does anyone faced this issue? Kindly suggest what can be possible reason, there are 5000 orders .... how can I correct this error for all...
Thanks
Mona
↧
Re: Batch Information missing Inventory Opening Balance
Ok... Thanks
↧
↧
oData time formatting in sapui5
Hi Experts,
I am not able to format oDate time in sapui5 application.
TimeOfMeasur:"PT18H25M00S"
formatter.js
Time: function(fValue) {
if (fValue) {
var date = new Date(fValue.ms);
var timeinmiliseconds = date.getTime();
var timeFormat = sap.ui.core.format.DateFormat.getTimeInstance({
pattern: "KK:mm:ss a"
});
var TZOffsetMs = new Date(0).getTimezoneOffset() * 60 * 1000;
var timeStr = timeFormat.format(new Date(timeinmiliseconds + TZOffsetMs));
return timeStr;
}
else
{
return fValue;
}
},
XML View
<Text text="{path:'TimeOfMeasur',formatter:'base.format.Formatter.Time'}"/>
I tried both the ways and i am getting Invalid Date.
var date = new Date(fValue.ms); //Invalid Date
and
var date = new Date(fValue); //Invalid Date
Regards,
Ashitha
↧
Re: Synchronize Asset and Equipment
Hi
Are gone through following link.This may be help you out
Synchronize Equipment creation with Asset maste... | SCN
Regards
Prasad
↧
Move out issue
Hi Guru,
I am trying to do move out and device removal same day but it is not possible in the system.
Please let me know where i have to do setting in customizing level so that above functionality will work.
Thanks in advance.
Regards,
Radhika Sharma
↧